Insulation Company in Burbank, CA
Blown in insulation solves the most common problem we find in Burbank homes: attics and wall cavities that were barely insulated when they were built, and have settled or degraded over 60 to 80 years of San Fernando Valley heat. Burbank’s 1940s and 1950s housing stock was framed for a different climate and a different energy era, so the work here rarely looks like a simple top-off. We match the material to your home, not the other way around, and we work house-by-house because Burbank’s shaded streets and post-war construction make every job different. Call (877) 265-5712 for a free estimate.
Why Burbank Homes Are Different
Burbank’s post-war building boom produced thousands of wood-frame stucco bungalows and ranch houses between the 1940s and 1950s, and many of them went up with paper-faced batts that would be considered inadequate by a wide margin today. Wall insulation was often skipped entirely. That means a Burbank homeowner with a 1952 ranch in the Rancho Equestrian district is often starting from a very different baseline than someone in a 1970s low-rise apartment block near the 5 freeway, or a new infill townhome off Olive Avenue.
The climate adds another layer of complexity. Burbank sits inland enough to catch long stretches of 95 to 105 degree heat in summer, but winter nights still drop into the 40s with enough regularity to matter. Insulation here has to pull double duty: cutting the cooling load in July and August while still holding heat during January evenings. Radiant barrier and attic ventilation choices matter as much as R-value in Burbank, and that is not true in every city we serve.
There is also the tree canopy factor. Magnolia Park and other established neighborhoods have mature street trees that shade roofs and walls unevenly. Two houses on the same block can have completely different attic temperatures at 3 p.m. in August. A standard per-square-foot insulation recommendation built for sun-baked attics does not hold up on a heavily shaded lot, and we spec accordingly.
Our Main Burbank Services
The two services Burbank homeowners call about most often are attic insulation and spray foam, and each one has its own dedicated page because the work, the local conditions, and the pricing are different enough to deserve their own treatment.
Attic Insulation in Burbank
Most Burbank attics we open up still have the original 1950s batts, compressed and heat-degraded, or in some cases nothing left but dust and rodent debris. Attic work here frequently involves removing old material before installing new, and addressing old can lights and wiring clearances that a newer home would not present. Summer attic temperatures regularly exceed 140 degrees, so we install air-sealing and, where called for, radiant barrier as part of the system rather than treating insulation as a standalone product. Get the full breakdown on Attic Insulation in Burbank.
Spray Foam Insulation in Burbank
Spray foam makes sense for Burbank homes with uninsulated wall cavities, hard-to-reach attic kneewalls, or owners looking for air-sealing and insulation in one pass. Because many older Burbank homes have never had wall insulation of any kind, open-cell spray foam can be injected into existing wall cavities without tearing out drywall in many cases. Closed-cell foam also helps with the moisture and noise from Burbank’s dense apartment blocks. Read the specifics at Spray Foam Insulation in Burbank.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Blown In Insulation in Burbank
Blown in insulation is the right call for many of Burbank’s older attics because it fills the irregular spaces between existing framing, wiring, and light fixtures that rigid batts can’t reach. We routinely blow GreenFiber cellulose into Burbank attics where the original insulation has compacted to a fraction of its rated R-value, and we see wall cavities in Magnolia Park homes that were simply never insulated at all. Because Burbank runs hot for four to five months of the year, a properly dense blown-in layer cuts the cooling load immediately and makes a measurable difference on the first LADWP bill after installation. For an overview of the method, see our Blown In Insulation hub.
Cellulose Insulation
Signs you need it
Your attic insulation has settled below the top of the joists, you can see bare spots between batts, or your upstairs rooms run 8 to 12 degrees hotter than the rest of the house in summer.
What it costs in Burbank
Cellulose blow-in for a typical Burbank attic runs most homeowners between $1,150 and $2,800 depending on square footage, depth needed, and whether old material must be removed first.
How we do it
We air-seal bypasses and penetrations, prep the attic with protective covers on can lights and vent baffles at eaves, then blow GreenFiber cellulose to the depth required for your target R-value.
Blown In Attic Insulation
Signs you need it
Your attic insulation is uneven or missing in spots, your HVAC runs constantly in July, or you can feel heat radiating through the ceiling on hot afternoons.
What it costs in Burbank
Blown-in attic insulation in Burbank typically costs between $1,000 and $2,500 for a standard 1,200 to 1,800 square foot attic, before any old insulation removal.
How we do it
We remove or remediate the old material where needed, install baffles to protect soffit vents, air-seal top plates and wire penetrations, then blow the new insulation to an even, code-required depth.
Blown In Cellulose Insulation
Signs you need it
You want an insulation upgrade with dense coverage, fire resistance, and recycled content, and you have an irregular attic layout with lots of framing and hard-to-reach corners.
What it costs in Burbank
Expect to pay between $1,200 and $3,000 for a complete blown-in cellulose job in Burbank, with the higher end reflecting deeper fills, dense-pack wall applications, or multi-zone attics.
How we do it
We use a high-volume blower to deliver GreenFiber cellulose at the correct density, checking depth markers as we go so the finished R-value matches what we quoted.
Loose Fill Insulation
Signs you need it
Your attic has shallow or uneven coverage of old loose material, your ceilings feel warm to the touch on hot nights, or your energy bills have crept up year over year.
What it costs in Burbank
Loose fill insulation in Burbank costs roughly $1,400 to $2,600 for a full attic, depending on the material chosen and the final depth required for your ceiling’s R-value target.
How we do it
We lay down depth guides, run the hose into the attic, and fill evenly across the entire attic floor, keeping clearances around heat sources like flues, can lights, and older knob-and-tube wiring where it remains.
What Blown In Insulation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Blown-in attic insulation (standard attic) | $1,000 – $2,500 |
| Cellulose blow-in | $1,150 – $2,800 |
| Loose fill insulation | $1,400 – $2,600 |
How much does blown in insulation cost in Burbank?
For most Burbank homes, blown-in attic insulation runs $1,000 to $2,800 depending on attic size, current insulation depth, and whether old material needs removal first. Dense-pack wall installations run higher. Call (877) 265-5712 for a free quote.
Can you install blown in insulation in older Burbank homes?
Yes. We work in 1940s and 1950s Burbank homes regularly, including attics with original knob-and-tube wiring and recessed can lights. We maintain code-required clearances and flag hotspots that a basic top-off would miss. Call (877) 265-5712 to schedule an assessment.
Brands We Service in Burbank
We carry and install Owens Corning, Demilec, and GreenFiber products in Burbank, and we stock the parts and accessories those systems require so we do not lose days waiting on a distributor. That means faster scheduling and a single contractor responsible for the whole job. See our brands for the full lineup.
Pricing for Insulation Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Blown-in attic insulation | $1,000 – $2,500 |
| Cellulose blow-in | $1,150 – $2,800 |
| Loose fill insulation | $1,400 – $2,600 |
| Blown-in fiberglass insulation | $1,000 – $2,300 |
| Attic insulation (batt replacement) | $1,100 – $2,700 |
| Spray foam insulation (open-cell) | $2,800 – $5,500 |
| Spray foam insulation (closed-cell) | $4,500 – $8,500 |
| Wall insulation (existing home retrofit) | $2,200 – $5,800 |
Burbank pricing gets pushed upward when we have to remove old degraded insulation first, when the attic has difficult access or extensive old wiring, or when the home needs air-sealing work in addition to new insulation. We give upfront pricing before any work begins, and the number we quote is the number you pay.
Neighborhoods We Serve in Burbank
We cover the entire city of Burbank, including ZIP codes 91505, 91506, 91507, and 91508. Every crew is based in the area, so response times are short and we can usually schedule an assessment within a few business days.
- Magnolia Park
- Rancho Equestrian
- Toluca Lake area
- Downtown Burbank
- Hillside District
Service Area – Cities Near Burbank
North Tustin Insulation serves Burbank and the surrounding San Fernando Valley communities. If you live just outside the city, we work in Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA as well. Call (877) 265-5712 and we will confirm coverage for your address.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Burbank
In most cases we can schedule a Burbank assessment within a few business days, and we carry insulation material on our trucks so smaller jobs can often start shortly after the estimate is approved. Call (877) 265-5712 to check current scheduling.
Basic insulation installation in an existing home does not usually require a Burbank building permit, but if the job involves structural changes or new construction, permitting rules change. We handle the details and tell you upfront if a permit will be needed. Call (877) 265-5712 with questions.
Yes. We regularly work in Burbank attics that still have knob-and-tube wiring, and we maintain the required clearance around live wiring and heat-producing fixtures like recessed can lights. This is standard for older Burbank homes, and we inspect before we install. Call (877) 265-5712 to schedule a look.
What happens when you call
- 1A real person answersNo phone trees — talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically same-day.
- 4You approve before work beginsNothing starts until you say go.
What Burbank Customers Say
"Found and sealed a gap around the chimney chase that was basically an open chimney to the attic."
— Gabriela Herrera"Installed baffles at the soffits so the new insulation didn't block the ventilation, which the previous contractor apparently never considered."
— Ryan Rhodes"Spray foam in the rim joists in the basement. The cold floors above them are gone."
— Bethany Ziegler